CCNA(Stand-ALONE)Lab 6-Banner MOTD
版权声明：原创作品，允许转载，转载时请务必以超链接形式标明文章 原始出处 、作者信息和本声明。否则将追究法律责任。http://redking.blog.51cto.com/27212/71516 |
Objective: Configure a banner Message of the Day (MOTD). The MOTD is displayed when a user logs on to the router. The banner can also be used to display information about the router itself or to display a security message.
Lab Equipment: Router 1 from the eRouters menu 1. Connect to Router 1, and enter privileged mode. Router>enable Router# 2. Enter configuration mode. Router#config t Router(config)# 3. Type the command to enter the banner message, and press ENTER. After you type banner motd, enter a delimiting character so the router knows when you are finished entering text for the banner. The easiest one to use is the letter Z. Router(config)#banner motd z Enter the text followed by the ‘z’ to finish  4. Now, all text that you type, until you type the letter Z, will be stored as the banner. Type the text “You do not have permission to be here. This router eats hackers for lunch! z”,and press ENTER. This will set the banner.You do not have permission to be here. This router eats hackers for lunch! z 5. To view the banner, exit configuration mode, and then exit the router. Press ENTER to display the banner. Router(config#)exit Router#exit Router>exit Press RETURN to get started. You do not have permission to be here. This router eats hackers for lunch!  *******************************************************
本文出自 “大唐网络” 博客，请务必保留此出处http://redking.blog.51cto.com/27212/71516 本文出自 51CTO.COM技术博客 |
redking
博客统计信息
热门文章
最新评论
友情链接
