CCNA(Stand-ALONE)Lab1-Connecting to a Router
版权声明：原创作品，允许转载，转载时请务必以超链接形式标明文章 原始出处 、作者信息和本声明。否则将追究法律责任。http://redking.blog.51cto.com/27212/69633 |
Objective: Become familiar with the Cisco Router.
Lab Equipment: Router 1 from the eRouters menu Background Reading: Lab Primer Lesson 1: Introduction to the Cisco Router Command-Line Interface 1. When the lab has finished loading, the Router 1 window will open, and the text “Press Enter to Start” will appear. 2. Click inside the Router 1 window, and press the ENTER key to get started. You are now connected to Router 1 and are at the user mode prompt. The prompt is broken into two parts: the host name and the mode. Router is Router 1’s host name, and the > prompt indicates user mode. Press Enter to get Started
Router> 3. Next, type the enable command to get to the privileged mode prompt. Router>enable Router# 4 . To return to user mode, simply type disable. From user mode, type logout or exit to exit the router. Router#disable Router>exit Router con0 is now available Press RETURN to get started ************************************************
本文出自 “大唐网络” 博客，请务必保留此出处http://redking.blog.51cto.com/27212/69633 本文出自 51CTO.COM技术博客 |
附件下载：
Lab Primer7
Lab Primer7
redking
博客统计信息
热门文章
最新评论
友情链接
